The LOGOCLIC transition profile is designed for floor covering thicknesses up to 15 mm. When attached in a concealed manner, it offers a perfect look without screw holes. The flat surface without decorative grooves ensures timeless elegance. Assembly is particularly quick and easy. First, the base profile is glued to the surface using assembly adhesive or a two-component adhesive. Alternatively, the base profile can also be screwed on. With the curved toothed joint bar, the upper profile snaps into the base profile and automatically adapts to the floor covering - variable in height and inclination. Even when there are significant differences in level, the profile fits tightly on both sides. At the same time, the curved toothing allows for easy dismantling. If necessary, the upper profile can be detached and then anchored back into the base profile. The profiles were tested by the German TÜV for a point load capacity of 1.5 tons. Note: Suitable adhesive or mounting material must be purchased separately.