For strong bonds around the house, Pattex Power assembly adhesive is the right choice. The Pattex assembly adhesive is ideal for bonding absorbent materials** such as concrete, interior plaster surfaces such as PVC, ceramic tiles, skirting boards, decorative and insulating panels and others.

But strong connections can also be achieved as wood adhesive, concrete adhesive and stone adhesive. The powerful adhesive offers a high initial adhesion of up to 150kg/m²* and final strength. Due to its temperature-resistant properties (-20°C to +70°C), the assembly adhesive can be used outside and inside. For professional results, the adhesive can be painted over and fills gaps up to 10 mm.

Application

The adhesive surfaces must be clean, dust-free, dry, stable and free of grease. A stable surface is a prerequisite and at least one adhesive surface must be absorbent. Very absorbent surfaces must be briefly pre-wet or primed.

Apply the adhesive thinly on one side and press the parts together firmly. Remove any adhesive residue immediately with a damp cloth. The final strength is reached after at least 48 hours. achieved depending on climate and amount of adhesive. The parts to be glued can still be moved within 20 minutes.

During the curing time, do not move the bonds and support or fix tense or heavy objects (note the leverage effect).

*Henkel-internal laboratory measurement: 15g/cm².
**Not suitable for PE, PP, PTFE, acrylic glass, natural stone, mirrors, those permanently exposed to water/waterlogging Glues, moisture-sensitive surfaces.
***Do not expose to direct weather. Constant exposure to moisture should be excluded.