The Schellenberg tubular motor Maxi STANDARD 15 with a torque of 15 Nm is used to motorize a roller shutter up to an area of 6.2 m² and a weight of 25 kg. It is designed for the Maxi roller shutter system and is installed directly into the octagonal shaft with a diameter of 60 mm. After installation, the end positions are adjusted mechanically with an adjusting pin.
Smooth running & Powerful
The smooth-running and powerful STANDARD tubular motor is characterized by a strong, low-wear brake and a maintenance-free motor with a high-quality gear unit with sintered gears. An extra-wide driver compensates for an unevenly cut roller shutter shaft and the special size of the adapter ensures optimal power transmission to the roller shutter shaft. Thanks to thermal overload protection, the motor switches off if it overheats and thus protects the motor.
Standard version
This tubular motor is available in the standard version, which has a mechanical end point adjustment (via an adjusting pin). It is controlled via roller shutter switches and timers. Retrofitting a radio control is possible at any time.
Uncomplicated installation
All Schellenberg roller shutter motors were developed for do-it-yourselfers and are delivered ready for installation. The scope of delivery also includes roller shutter shaft adapters and wall bearings.
For installation, you must open the roller shutter box and replace the roller shutter shaft if necessary. In addition, it must be possible to connect the roller shutter motor to a power supply with a voltage of 230 V and 50 Hz. We recommend that you only have electrical work carried out by professional specialists.
