Alpina Interior White - White paint for walls and ceilings

The Alpina Wall Paint Interior White is a highly opaque and easy-to-use synthetic resin dispersion according to DIN55945. Drip-inhibited and water-thinnable, it is easy to use and ensures optimal painting results. Alpina Interior White can be used universally and can be combined with Alpina solid color & Tinting Color Color (contains preservatives).

As a high-quality wall and ceiling paint, Interior White from Alpina is ideal for new and renovation paintwork. This wall paint is bright white, diffusible and low-odor. It impresses with its resistance to washing and its pleasant workmanship.

Benefits at a glance

• High coverage
• High coverage
• Wash-resistant
• Free from solvents and preservatives
• Drop-inhibited

Quality according to DIN EN 13 300

• Opacity: Class 2
  (with a coverage of 6 m²/liter)
• Wet abrasion resistance: Class 3
  (corresponds to wash resistance according to DIN 53778)
• Gloss level: matt

Suitable substrates

• Mineral plasters
• Primed Gypsum plasterboards
• Concrete
• Sand-lime brick and exposed brickwork
• Stable old coatings
• Synthetic resin plaster

Processing

The surface to be painted must be clean, free of release agents and dry. Due to the high opacity, a single coat of paint is sufficient in many cases. For high-contrast and/or absorbent surfaces, a previous primer coat is recommended. This can, for example, be pre-painted with Alpina Interior White wall paint diluted up to 5% with water.

Drying time

The surfaces coated with Alpina Interior White are surface dry after around four to six hours and can be painted over again. The surface is completely dry and resilient after about 24 hours. Temperatures below + 20 °C and/or humidity higher than 65% relative humidity extend these drying times.

Return instructions

If you wish to return a product, please contact our BAUHAUS Contact Center.