The Pattex 100% Repair Power Glue makes extra strong bonds with extreme hold possible. The solvent-free universal adhesive with FlexTec polymer formula ensures extreme resistance on almost all materials* such as glass, stone, ceramics, metals, plastics, concrete, leather, rubber, hard and soft PVC and GRP. As a waterproof adhesive, the repair adhesive is resistant to moisture and humidity and can be used optimally both indoors and outdoors. The strong adhesive fills gaps up to 5mm and at the same time impresses with its elastic bonds. Thanks to the applicator and anti-drip formula, the adhesive can also be applied cleanly - even on vertical surfaces. Application: Surfaces to be bonded must be clean, dry and free of dust, grease and release agents. For a transparent bond, a thin layer of glue is applied and both parts are joined together. Squeeze for 1 hour. For use as a gap filler, the adhesive is applied in thick layers (up to 5 mm). Both parts are held together for 1 to 3 hours. 70% of the final strength is achieved after 24 hours. For bonds with high initial strength, apply a thin layer evenly to both surfaces and allow to dry for 3-4 minutes. Pattex Extreme Repair then becomes sticky like adhesive tape and both parts can be stuck together by pressing them firmly together. For an excellent end result, the gel can be painted over after it has dried. *Not suitable for PE, PP, PTFE or sensitive textiles.